GLTech frogblue frogRelay2-2 DIN rail-mounted Switching actuator 2 channels

frogblue Relay, frogRelay2-2, Multifunctional 2-channel relay switch with 2 outputs for roller blinds/roller blind control system or for switching other consumers. With 2 inputs to query buttons and switches (110-240 V ~). With comfort and timer functions, power measurement and excess current detection. (Total 1200 W @ 230 V~).

Bluetooth LE based system with mesh technology, without cabling. Double encryption of data, also controllable via secure VPN connection.

Product characteristics:
- Switch status feedback
- Parametrisable switching on and switching off behaviour
- Switch on and switch off delay
- Mutual locking of outputs in motor mode/roller blind mode (configuration using the frogblue app)
- Mains supply via power cable, no additional cabling required between frogblue modules.

Intended use:
For assembly in device sockets according to DIN 49073. Socket depth minimum 53 mm when installed behind switch insert, individual installation is required at lower depth.

System information:
This device is a product of the frogblue system. Detailed technical expertise obtained through frogblue training sessions is a prerequisite. The functionality of the device depends on the software. Detailed information regarding software versions and the respective range of functions can be found on the frogblue website. Technical descriptions, additional detailed instructions as well as notes, information regarding proper disposal can be found in the manual, which is available on the frogblue website. Commissioning and configuration will be executed using the frogblue app.

Safety information:
Electrical devices may only be installed and assembled by qualified, skilled electricians. Failure to observe the instructions can cause damage to the device and result in fire and other hazards. Danger caused by electric shock. Before starting work on the device or replacing light sources, always disconnect the power supply and switch off the circuit breakers. When using the load outputs simultaneously, the total load of 1200W must not be exceeded. Country-specific regulations must always be observed.